Agilent Technologies Agilent B2201A - Manual (Page 81)

Agilent B2200 User’s Guide, Edition 4 3-19
Front Panel Operation
Switch Control Functions
NOTE Connection rule cannot be specified for the input ground port, which can always be
connected to multiple output ports.
Connection sequence (to connect input ground port to output ports) is always
Break-Before-Make.
Ground mode cannot be set to ON when the bias mode is ON.
The input ground port and a ground enabled input port cannot be assigned to the
same input port.
If the ground input port and a couple port have been assigned to the same input port,
the ground mode and the couple mode cannot be used in parallel.
If a ground enabled input port and a couple port have been assigned to the same
input port, the ground mode and the couple mode cannot be used in parallel.