Agilent Technologies Agilent B2201A - Manual (Page 173)

Agilent B2200 User’s Guide, Edition 4 5-45
SCPI Command Reference
:SYSTem:DISPlay:LED
Syntax :SYSTem:DISPlay:LCD state
Even though state is OFF, some status indicators on the LCD will be effective.
Example OUTPUT @Agb2200;":SYST:DISP:LCD 1"
:SYSTem:DISPlay:LED
This command enables/disables the front panel Light Emitting Diodes matrix when
the B2200 is in the GPIB remote mode. The front panel LED matrix will be
automatically set to ON by the mode transition from GPIB remote to GPIB local.
Syntax :SYSTem:DISPlay:LED state
Example OUTPUT @Agb2200;":SYST:DISP:LED 1"
:SYSTem:DISPlay:STRing
When the B2200 is in the GPIB remote mode, you can display a string (maximum
39 characters) on the front panel LCD. This command specifies the string and
displays it on the LCD.
The specified string data is only displayed on the front panel LCD. It is not
memorized. So a display-change operation will clear and delete the string data.
Parameter Explanation
state ON or 1: enables the LCD
OFF or 0: disables the LCD (initial setting)
Parameter Explanation
state ON or 1: enables the LEDs (initial setting)
OFF or 0: disables the LEDs