To set remote display mode, To return to local mode – Agilent Technologies Agilent B2201A User Manual
Page 73
Agilent B2200 User’s Guide, Edition 4
3-11
Front Panel Operation
Operation
To Set Remote Display Mode
This instruction enables or disables the data display in the GPIB remote condition.
See “RMT_DSPL” on page 3-33.
LCD
1. Press the
Menu
key. The setup menu will be displayed on the LCD.
2. Move the cursor to RMT_DSPL, then press the
Enter
key.
3. Move the cursor to LCD, then press the
Enter
key.
4. Press the arrow keys to set the remote display mode ON or OFF.
5. Press the
Enter
key to make the setup effective, or press the
Exit
key to cancel
changing the setup.
LED matrix
1. Press the
Menu
key. The setup menu will be displayed on the LCD.
2. Move the cursor to RMT_DSPL, then press the
Enter
key.
3. Move the cursor to LED, then press the
Enter
key.
4. Press the arrow keys to set the remote display mode ON or OFF.
5. Press the
Enter
key to make the setup effective, or press the
Exit
key to cancel
changing the setup.
NOTE
For the high speed switching operation in the GPIB remote control mode, set the
remote display mode OFF. With the mode ON, the switching speed will slow.
To Return to Local Mode
Press the
Local
key. If the front panel keys are locked, send the :SYST:KLC
command from an external computer, then press the
Local
key.