NORD Drivesystems B1000 - Manual (Page 569)

www.nord.com D567
DI
MENSI
ONS
G1000 – Subject to Change Without Notice
Hollow Shaft
Dimensions
KEY
ADH UYH
UH UH DH
LH LH
TYPE UH DIAMETER TOLERANCE ADH LH DH UYH KEY SIZE
w x h x l
KEY QTY
SK 92072 AZ/AF 0.750* +0.0010 / -0.0000 4.57 0.98 1.38 0.84 3/16 x 3/16 x 2 2
0.500 +0.0010 / -0.0000 4.57 0.98 1.38 0.56 1/8 x 1/8 x 7/8 2
25mm +0.021 / -0.000mm 116mm 30mm 35mm 28.3mm 8 x7 x 25mm 2
SK 92172 AZ/AF 1.000* +0.0010 / -0.0000 5.43 1.18 1.57 1.09 1/4 x 3/16 x 2 2
25mm +0.021 / -0.000mm 138mm 30mm 40mm 28.3mm 8 x7 x 32mm 2
SK 92372 AZ/AF 1.1875* +0.0010 / -0.0000 6.46 1.97 1.97 1.30 1/4 x 1/4 x 2-1/4 2
1.250 +0.0010 / -0.0000 6.46 1.97 1.97 1.37 1/4 x 1/4 x 2-1/4 2
1.4375 +0.0010 / -0.0000 6.46 1.97 1.97 1.61 3/8 x 3/8 x 2-1/2 2
30mm +0.021 / -0.000mm 164mm 50mm 50mm 33.3mm 8 x 7 x 60mm 2
SK 92672 AZ/AF 1.375* +0.0010 / -0.0000 6.69 2.36 2.17 1.52 5/16 x 5/16 x 2-1/2 2
1.4375 +0.0010 / -0.0000 6.69 2.36 2.17 1.61 3/8 x 3/8 x 2-1/2 2
1.500 +0.0010 / -0.0000 6.69 2.36 2.17 1.67 3/8 x 3/8 x 2-1/2 2
35mm +0.025 / -0.000mm 170mm 55mm 60mm 38.3mm 10 x 8 x 60mm 2
SK 92772 AZ/AF 1.500* +0.0010 / -0.0000 7.56 2.36 2.17 1.67 3/8 x 3/8 x 2-1/4 2
1.4375 +0.0010 / -0.0000 7.56 2.36 2.17 1.61 3/8 x 3/8 x 2-1/4 2
40mm +0.025 / -0.000mm 192mm 60mm 55mm 43.3mm 12 x 8 x 60mm 2
* standard size
• Dimensions are in inches unless otherwise noted.
• For shaft sizes not shown, consult NORD.
Hollow Shaft Dimensions
(AZ-AF)