NORD Drivesystems BU0290 - Manual (Page 27)

4 Commissioning
BU 0290 GB-4312 Subject to technical amendments 27
4.3 Configuration in the Bus system (example SIMATIC Manager)
In order to carry out planning with the SK TU4-PNT, first of all the GSDML file "GSDML-V2.2-NORD
DRIVESYSTEMS-TUXPNT-201xxxxx.xm" must be installed in the SIMATIC Manager. Select the relevant file
in the Hardware Configurator.
The current gsdml files are available on the NORD homepage under
NORD - Dokumentation - Software -
NORDAC Options .
Fig. 6 Installation of the GSDML file in the SIMATIC Manager
After this, the SK TU4-PNT from NORD DRIVESYSTEMS can then be found in the hardware catalogue of the
SIMATIC Hardware Manager and can then be entered into the PROFINET system.