Document Outline

• Network User’s Guide
  • Applicable models
  • Definitions of notes
  • IMPORTANT NOTE
  • Table of Contents
  • Network Operation
    • 1 Introduction
      • Network features
        • Other Network features
          • Security
          • Secure Function Lock 2.0
          • Store Print Log to Network
    • 2 Changing your machine’s network settings
      • How to change your machine’s network settings (IP address, Subnet mask and Gateway)
        • Web Based Management (web browser)
        • Using the control panel
        • Using the BRAdmin Light utility
          • Installing BRAdmin Light for Windows®
          • Installing BRAdmin Light for Macintosh
          • Setting the IP address, Subnet Mask and Gateway using BRAdmin Light
        • BRAdmin Professional 3 utility (Windows®)
    • 3 Configuring your machine for a wireless network
      • Overview
      • Confirm your network environment
        • Connected to a computer with a WLAN access point/router in the network (Infrastructure mode)
          • Configuration method
        • Connected to a wireless capable computer without a WLAN access point/router in the network (Ad-hoc mode)
      • Wireless configuration temporarily using a USB cable (Recommended for Windows®)
      • Configuration using the machine’s control panel Setup Wizard
        • Manual configuration from the control panel
        • Configuring your machine when the SSID is not broadcast
        • Configuring your machine for an enterprise wireless network
      • One push configuration using WPS (Wi-Fi Protected Setup) or AOSS™
      • Configuration using the PIN Method of WPS (Wi-Fi Protected Setup)
      • Configuration in Ad-hoc mode (For IEEE 802.11b)
        • Using configured SSID
        • Using a New SSID
    • 4 Control panel setup
      • Overview
      • Network menu
        • TCP/IP
          • Boot Method
          • IP Address
          • Subnet Mask
          • Gateway
          • Node Name
          • WINS Config
          • WINS Server
          • DNS Server
          • IP Boot Tries
          • APIPA
          • IPv6
        • Ethernet (wired network only)
        • Wired Status
        • Setup Wizard (wireless network only)
        • WPS (Wi-Fi Protected Setup)/AOSS™ (wireless network only)
        • WPS (Wi-Fi Protected Setup) w/PIN Code (wireless network only)
        • WLAN Status (wireless network only)
          • Status
          • Signal
          • Channel
          • Speed
          • SSID
          • Comm. Mode
        • MAC Address
        • Set to Default
        • Wired Enable
        • WLAN Enable
        • IPsec
      • Reset the network settings to the factory default
      • Printing the Network Configuration Report
      • Printing the WLAN report
      • Function table and default factory settings
    • 5 Web Based Management
      • Overview
      • How to configure the machine settings using Web Based Management (web browser)
      • Setting a password
      • Gigabit Ethernet (wired network only)
        • How to configure the Gigabit Ethernet and Jumbo Frame settings using Web Based Management (web browser)
      • Secure Function Lock 2.0
        • How to configure the Secure Function Lock 2.0 settings using Web Based Management (web browser)
          • Basic configuration
          • Setting up public mode
          • Restricting PC print by PC user login name
          • Other features
      • How to configure the SNTP protocol using Web Based Management
      • Store Print Log to Network
        • How to configure the Store Print Log to Network settings using Web Based Management (web browser)
        • Error Detection Setting
        • Understanding Error Messages
      • Storage Print
      • IPsec
    • 6 Security features
      • Overview
      • Managing your network machine securely using SSL/TLS
        • Secure Management using Web Based Management (web browser)
      • Secure Management using BRAdmin Professional 3 (Windows®)
        • To use the BRAdmin Professional 3 utility securely, you need to follow the points below
      • Printing documents securely using SSL/TLS
      • Sending an E-mail securely
        • Configuration using Web Based Management (web browser)
        • Sending an E-mail with user authentication
        • Sending an E-mail securely using SSL/TLS
      • Using IEEE 802.1x authentication
        • IEEE 802.1x authentication configuration using Web Based Management (web browser)
      • Using Certificates for device security
        • Configure certificate using Web Based Management
        • Creating and installing a certificate
          • Step by step chart for creating and installing a certificate
          • How to create and install a self-signed certificate
          • How to install the self-signed certificate on your computer
          • For Windows® XP and Windows Server® 2003 users
          • How to create a CSR
          • How to install the certificate to your machine
        • Choosing the certificate
        • Import and export the certificate and private key
          • How to import the self-signed certificate, the certificate issued by a CA, and the private key
          • How to export the self-signed certificate, the certificate issued by a CA, and the private key
      • Managing multiple certificates
        • Import and export a CA certificate
          • How to import a CA certificate
          • How to export a CA certificate
    • 7 Troubleshooting
      • Overview
        • Identifying your problem
          • Go to the page for your solution from the lists below
  • Network Glossary
    • 8 Types of network connections and protocols
      • Types of network connections
        • Wired network connection example
          • Peer-to-Peer printing using TCP/IP
          • Network Shared printing
      • Protocols
        • TCP/IP protocols and functions
          • DHCP/BOOTP/RARP
          • APIPA
          • ARP
          • DNS client
          • NetBIOS name resolution
          • WINS
          • LPR/LPD
          • SMTP client
          • Custom Raw Port (Default is Port 9100)
          • IPP
          • mDNS
          • TELNET
          • SNMP
          • LLMNR
          • Web Services
          • HTTP
          • SNTP
          • CIFS
          • IPv6
    • 9 Configuring your machine for a network
      • IP addresses, subnet masks and gateways
        • IP address
          • How the IP address is assigned to your print server:
        • Subnet mask
        • Gateway (and router)
      • IEEE 802.1x Authentication
    • 10 Wireless network terms and concepts
      • Specifying your network
        • SSID (Service Set Identifier) and channels
      • Security terms
        • Authentication and encryption
        • Authentication and Encryption methods for a personal wireless network
          • Authentication methods
          • Encryption methods
          • Network Key
        • Authentication and Encryption methods for an enterprise wireless network
          • Authentication methods
          • Encryption methods
          • User ID and password
    • 11 Additional network settings from Windows®
      • Types of additional network settings
      • Installing the driver used for printing via Web Services (Windows Vista® and Windows® 7)
      • Uninstalling the driver used for printing via Web Services (Windows Vista® and Windows® 7)
      • Network printing installation for Infrastructure mode when using Vertical Pairing (Windows® 7)
    • 12 Security terms and concepts
      • Security features
        • Security terms
        • Security protocols
          • SSL (Secure Socket Layer) / TLS (Transport Layer Security)
          • HTTPS
          • IPPS
          • SNMPv3
          • IPsec
        • Security methods for E-mail Sending
          • POP before SMTP (PbS)
          • SMTP-AUTH (SMTP Authentication)
          • APOP (Authenticated Post Office Protocol)
          • SMTP over SSL/TLS
          • POP over SSL/TLS
  • Appendixes
    • Appendix A
      • Supported protocols and security features
    • Appendix B
      • Using services
      • Other ways to set the IP address (for advanced users and administrators)
        • Using DHCP to configure the IP address
        • Using RARP to configure the IP address
        • Using BOOTP to configure the IP address
        • Using APIPA to configure the IP address
        • Using ARP to configure the IP address
        • Using the TELNET console to configure the IP address
  • Index
  • brother ENG