AT&T System 85 - Manual (Page 114)

CHAPTER 5. REFERENCE CONSOLE ILLUSTRATION AND LEGEND
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
TERM ID (Terminal Identification) Button
Shows the called extension number on the alphanumeric display when a timed-
reminder call is returned to the console. Used only when the Attendant Release Loop
feature is active.
HOLD Button
Places a call on hold.
PA (Position Available) Light
When on, indicates your console is available for calls.
RELEASE Button
Releases your console from a call, readying your console for the next call.
ANSWER Button
Automatically connects the incoming call to your console.
START Button
Obtains dial tone.
CW (Calls Waiting) Light
When on, indicates that one or more calls are waiting to be switched to an idle loop
on the console.
When flashing, indicates that the number of waiting calls equals or exceeds the
established limit set for the console.
PR (Priority) Light
When on, indicates that a call from another attendant is waiting or that an Automatic
Circuit Assurance referral call is waiting.
Touch-Tone Dialing Pad
Used for dialing extension numbers, outside numbers, or access codes.
ACK (Acknowledge) Light
When on, indicates a trouble condition exists and has been acknowledged by a
maintenance center.
When flashing, indicates a trouble condition exists that has not been acknowledged.
The attendant should report the trouble.
5-5