AT&T System 85 - Manual (Page 82)

CHAPTER 4. OPERATING FEATURES
You can restrict a group of extension numbers by dialing the Controlled Restriction access
code for the group and a code number for the specific restriction to be assigned. You can
cancel restrictions by dialing 0 (zero).
You can control restrictions on telephones/voice terminals on a per-position basis when
Enhanced Uniform Call Distribution (EUCD) is provided in your system.
The Controlled Restriction access codes to be dialed for each of the six types of restrictions
are:
Outward restriction = 1
Terminal-to-terminal restriction = 2
Outward and terminal-to-terminal restriction = 3
Total restriction = 4
Termination restriction = 5
Outward and termination restrictions = 6.
To activate a restriction for an individual extension number
1.
2.
3.
4.
5.
Press an idle loop button.
ATND light goes on. PA light goes off.
Press [START] .
Listen for dial tone.
Dial the Restriction—Attendant Control of Single Voice Terminal access code
followed by the appropriate Restriction Code Number. Activate only one restriction at
one time.
Listen for dial tone.
Press the appropriate hundreds group select button.
Group select light goes on.
Press the DXS button for the extension number to which the restriction is to be
applied.
Listen for tone:
Confirmation tone—restriction is assigned.
4-60