AT&T System 85 - Manual (Page 86)

CHAPTER 4. OPERATING FEATURES
11. Press the loop button below the flashing HOLD light.
Display and ATND lights go on. HOLD and PA lights go off. Outside caller is
connected.
12. Connect outside caller to next extension number.
13. When last serial call has been placed, press [RELEASE] .
ATND light goes off. PA light goes on.
Tenant Services
Allows a large Generic 2 Communications System to appear to users as many small
independent systems. Such a large system, known as a partioned system, can be shared
among a wide assortment of user groups referred to as “tenants.” A partitioned Generic 2
Communications System can contain as many as 40 attendant consoles numbered 0 through
40 (41 attendant partitions). An attendant in a partition is allowed to place or extend calls
(using an extension number) to any telephone/voice terminal assigned to the attendant’s
partition. An attendant is not allowed to place or extend calls to voice terminals in other
partitions. Only the attendant in attendant partition 0 (zero) or the System Manager can place
calls to any extension on the switch.
Timed Recall on Outgoing Calls
Alerts you whenever outgoing calls exceed the preestablished time interval allowed in your
system for calls on certain trunk groups. Such calls are routed to your console. You hear an
audible ring. The ATND light flashes. PA light goes off. Alphanumeric display shows
TIME
or some other identification designated by your System Manager. This feature is deactivated
during a malicious call trace.
To respond to a timed recall:
1.
2.
3.
Press [ANSWER] .
Audible ring stops. Display goes dark. ATND and ANS lights go on. You are
connected with the call in progress in a 3-way conference.
If the call is to be continued with timing, press [RELEASE] .
ANS and ATND lights go off. PA light goes on. Call continues for another timing
interval.
If the call is to be continued without timing, press [HOLD] .
Call continues without timing. You are dropped from the connection.
4-64