AT&T System 85 - Manual (Page 87)

CHAPTER 4. OPERATING FEATURES
4. If the call is to be terminated, press [CANCL] , [RELEASE] .
ANS and ATND lights go off. PA light goes on.
Trunk Identification by Attendant
Allows you to identify a specific trunk that is connected by you (the attendant) “on any
incoming or outgoing call. Generally, you can use this feature in conjunction with the
Automatic Circuit Assurance (ACA) feature so that you can identify faulty trunks when you
receive referral calls.
To determine the identity of the trunk:
1. P r e s s
T R K
I D
Display shows Trunk Group Dial access code.
2 . P r e s s T R K
I D
Display shows Trunk Index Number.
3 .
P r e s s T R K
I D
Display resets to initial identification.
4. Press [RELEASE] .
Display and ATND lights go off. PA light goes on.
Trunk Verification by Attendant
Allows you to access individual trunks in a trunk group to verify status. You can determine if
a trunk signals busy because of a trunk fault or if the trunk has poor transmission.
To activate the feature:
1. Press an idle loop button.
ATND light goes on.
2. Press [VERFY] .
VERFY light goes on.
3. Press [START] .
Listen for dial tone.
4-65