HP LaserJet 4250 - Manual (Page 180)

Control panel message Description Recommended action
Unable to store job
<JOBNAME>
alternates with
<current status
message>
The print job named cannot be stored
due to a memory, disk, or configuration
problem. Correct the error and then try again to
store the job.
UNSUPPORTED DATA ON
[FS] DIMM IN SLOT X
To clear press
The data on the DIMM is not supported.
[FS] stands for either ROM or FLASH. The DIMM may need to be replaced.
Turn the printer power off before
removing it.
Press ( S
ELECT
button) to continue.
USE TRAY XX
[TYPE][SIZE]
To change press /
To use press
The printer did not detect the type and
size of media requested. The message
shows the most likely type and size
available and the tray in which they are
available. Press ( S
ELECT
button) to accept the
values in the message, or use ( U
P
button) and ( D
OWN
button) to scroll
through the available choices.
WAITING FOR
TRAY XX TO LIFT
alternates with
<current status
message>
The specified tray is in the process of
lifting the paper to the top of the tray for
proper feeding. No action necessary.
WARMING UP
alternates with
<current status
message>
The printer is coming out of powersave
mode. Printing will continue as soon as it
is done. No action necessary.
Interpreting control-panel messages (continued)
168 Chapter 4 Problem solving ENWW