Cartridge out, Jam recovery – HP LaserJet 4250 User Manual

Page 35

Advertising
background image

Cartridge out

The printer has two options for this menu item.

Select CONTINUE to allow the printer to continue printing. A REPLACE CARTRIDGE
warning message appears until the print cartridge is replaced. Printing in this mode can
continue only for a specific number of pages. After that, the printer stops printing until
you replace the empty print cartridge. This is the default setting.

Select STOP if you want the printer to stop printing until the empty print cartridge is
replaced.

To set the cartridge-out response

1. Press

M

ENU

to open the menus.

2. Press (

D

OWN

button) to highlight CONFIGURE DEVICE.

3. Press (

S

ELECT

button) to select CONFIGURE DEVICE.

4. Press (

D

OWN

button) to highlight SYSTEM SETUP.

5. Press (

S

ELECT

button) to select SYSTEM SETUP.

6. Press (

D

OWN

button) to highlight CARTRIDGE OUT.

7. Press (

S

ELECT

button) to select CARTRIDGE OUT.

8. Press (

U

P

button) or (

D

OWN

button) to select the appropriate setting.

9. Press (

S

ELECT

button) to set the selection.

10. Press

M

ENU

to exit the menu.

Jam recovery

Use this option to configure the printer response to jams, including how the printer handles
the pages involved. AUTO is the default value.

AUTO. The printer automatically turns jam recovery on when sufficient memory is
available.

ON. The printer reprints any page that is involved in a jam. Additional memory is
allocated to store the last few pages that were printed, and this might cause overall
printer performance to suffer.

OFF. The printer does not reprint any page that was involved in a jam. Because no
memory is used to store the most recent pages, overall printer performance might be
optimized.

ENWW

Control panel

23

Advertising
This manual is related to the following products: