HP LaserJet 4250 - Manual (Page 68)

Understanding media output options
The printer has three output locations: the top (standard) output bin, the rear output bin, and
the optional stacker or stapler/stacker.
Printing to the top (standard) output bin
Printing to the rear output bin
Printing to the optional stacker or stapler/stacker
Orientation of paper when a stapler is installed
Printing to the top (standard) output bin
The top output bin collects paper face-down, in the correct order. The top output bin should
be used for most print jobs, including transparencies. To use the top output bin, be sure that
the rear output bin is closed. To avoid jams, do not open or close the rear output bin while
the printer is printing.
Printing to the rear output bin
The printer always prints to the rear output bin if it is open. Media that is printed to this bin
will exit face-up, with the last page on top (reverse order).
Printing from tray 1 to the rear output bin provides the straightest path. Opening the rear
output bin might improve performance with the following items:
● Envelopes
● Labels
● Small custom-size paper
● Postcards
● Paper heavier than 120 g/m 2 (32 lb)
56 Chapter 2 Printing tasks ENWW