HP LaserJet 4250 - Manual (Page 226)

Item Values Explanation
DEFAULT
PAPER SIZE
*LETTER
LEGAL
EXECUTIVE
STATEMENT
8.5 x 13
A4
A5
B5 (JIS)
EXECUTIVE (JIS)
DPOSTCARD (JIS)
16K
ENVELOPE 10
ENVELOPE
MONARCH
ENVELOPE C5
ENVELOPE DL
ENVELOPE B5
CUSTOM
Sets the default image size for paper and
envelopes. (The item name changes from paper
to envelope as you scroll through the available
sizes.) This setting applies only to print jobs that
do not have the paper size specified in the
program or printer driver.
DEFAULT
CUSTOM PAPER
SIZE
UNIT OF MEASURE
X DIMENSION
Y DIMENSION
Sets a default custom paper size for tray 1 or
any 500-sheet tray. This menu appears only if
the Custom-Standard switch in the selected tray
is set to Custom.
PAPER DESTINATION *STANDARD TOP BIN
REAR BIN
STACKER BIN
Configures the output bin destination. Only the
optional bins that are installed appear on the
menu.
DUPLEX *OFF
ON
Appears only if an optional duplex-printing
accessory is installed. Select ON to print on both
sides (duplex) or OFF to print on one side
(simplex) of a sheet of paper.
DUPLEX
BINDING
*LONG EDGE
SHORT EDGE
Changes the binding edge for duplex printing.
The menu item appears if an optional duplex-
printing accessory is installed in the printer and
DUPLEX=ON.
OVERRIDE
A4/LETTER
NO
*YES
Allows the printer to print an A4-size job on letter-
size paper if A4-size paper is not loaded in the
printer (or vice versa).
MANUAL FEED *OFF
ON
Feeds the paper manually from tray 1, rather
than automatically from a tray. If MANUAL
FEED=ON and tray 1 is empty, the printer goes
offline when it receives a print job. MANUALLY
FEED [PAPER SIZE]appears on the printer
control-panel display.
214 Appendix B Control panel menus ENWW