HP LaserJet 4250 User Manual
Page 78
NOTE
For more information about paper that has a special finish, such as laid or bond paper, see
Printing on paper that has a special finish
For tray 1, load the paper with the front side facing up, and the top, short edge toward the
printer.
For tray 2, optional 500-sheet trays, and the optional 1,500-sheet tray, load the paper with
the front side facing down, and the top, short edge toward you.
NOTE
When Alternative Letterhead mode is enabled in the printer driver, and Letterhead or
Preprinted is selected as the media type, you must orient the media for two-sided (duplex)
printing.
Guidelines for printing on letterhead or preprinted forms
●
Do not use letterhead paper that is printed with low-temperature inks, such as those
used in some types of thermography.
●
Do not use raised or embossed letterhead.
●
The printer uses heat and pressure to fuse toner to the paper. Make sure that any
colored paper or preprinted forms use inks that are compatible with this fusing
temperature (200°C or 392°F for .01 second).
66
Chapter 2 Printing tasks
ENWW