HP LaserJet 4250 - Manual (Page 45)

To set up a Windows computer to use the network printer with Windows-sharing
You can share the printer on the network so that other network users can print to it.
See your Windows documentation to set up Windows-sharing. After the printer is shared,
install the printer software on all computers that share the printer.
Installing Macintosh printing system software for networks
This section describes how to install Macintosh printing system software. The printing
system software supports Apple Mac OS 9.x and later and OS X V10.1 and later.
The printing system software includes the following components:
● PostScript Printer Description files. The PostScript (PS) Printer Description files
(PPDs), in combination with the Apple LaserWriter 8 printer driver, provide access to the
printer features and allow the computer to communicate with the printer. An installation
program for the PPDs and other software is provided on the CD-ROM that came with the
printer. In addition, use the Apple LaserWriter 8 printer driver that comes with the
computer.
● HP LaserJet Utility. The HP LaserJet Utility provides access to features that are not
available in the printer driver. Use the illustrated screens to select printer features and
complete tasks with the printer:
– Name the printer, assign it to a zone on the network, download files and fonts, and
change many of the printer settings.
– Set a password for the printer.
– Check the levels of printer consumables.
– Configure and set the printer for Internet Protocol (IP) or AppleTalk printing.
To install printer drivers in Mac OS 9.x
1. Connect the network cable between the HP Jetdirect print server and a network port.
2. Insert the CD-ROM into the CD-ROM drive. The CD-ROM menu runs automatically. If
the CD-ROM menu does not run automatically, double-click the CD-ROM icon on the
desktop, and then double-click the Installer icon. This icon is located in the Installer/
<language> folder of the Starter CD-ROM, where <language> is your language
preference. For example, the Installer/English folder contains the Installer icon for the
English printer software.
3. Follow the instructions on the screen.
4. From HD, click Applications, click Utilities, and then open the Apple Desktop Printer
Utility.
5. Double click Printer (AppleTalk).
6. Next to AppleTalk Printer Selection, click Change.
7. Select the printer, click Auto Setup, and then click Create.
8. On the Printing menu, click Set Default Printer.
To install printer drivers in Mac OS X V10.1 and later
1. Connect the network cable between the HP Jetdirect print server and a network port.
ENWW Software 33