Clearing jams from the optional envelope feeder – HP LaserJet 4250 User Manual

Page 148

Advertising
background image

5. Rotate the paper guide to check for additional jammed media underneath. If jammed

media is present, remove it.

6. Replace the entrance cover and close tray 1.

7. Reinstall the print cartridge and close the top cover.

8. If a jam message persists, jammed media is still in the printer. Look for the jam in

another location. (See

Jam locations

.)

If you are using a non-HP print cartridge, the message NON HP SUPPLY INSTALLED
might appear on the printer control panel display. Press (

S

ELECT

button) to continue.

Clearing jams from the optional envelope feeder

This section applies only to jams that occur when you are using an optional envelope feeder.

To clear jams from the optional envelope feeder

1. Remove any envelopes that are loaded in the optional envelope feeder. Lower the

envelope weight and lift the tray extension up, to the closed position.

136

Chapter 4 Problem solving

ENWW

Advertising
This manual is related to the following products: