HP LaserJet 4250 - Manual (Page 238)

Item Values Explanation
EMBEDDED
JETDIRECT MENU TCP/IP
IPX/SPX
APPLETALK
DLC/LLC
SECURE WEB
DIAGNOSTICS
TCP/IP: Select whether the TCP/IP protocol
stack is enabled or disabled. You can set several
TCP/IP parameters.
Select the TCP/IP CONFIGURE METHOD to
configure the EIO card. For the MANUAL option,
set the values for IP ADDRESS , SUBNET
MASK , LOCAL GATEWAY, and DEFAULT
GATEWAY.
IPX/SPX: Select whether the IPX/SPX protocol
stack (in Novell NetWare networks, for example)
is enabled or disabled.
APPLETALK: Enable or disable an AppleTalk
network.
DLC/LLC: Select whether the DLC/LLC protocol
stack is enabled or disabled.
SECURE WEB: Specify whether the embedded
Web server accepts communications by using
only secure HTTP (HTTPS) or by using both
HTTP and HTTPS.
DIAGNOSTICS: Provides tests to help diagnose
network hardware or TCP/IP network connection
problems.
Resets submenu
Items on the Resets submenu relate to returning settings to the defaults and changing
settings such as Sleep Mode.
The section that follows lists the settings and possible values. In the Values column, the
default value for each setting is the one with an asterisk (*) next to it.
Item Values Explanation
RESTORE
FACTORY
SETTINGS
There is no value to
select. Performs a simple reset and restores most of the
factory (default) settings. This item also clears
the input buffer for the active I/O.
CAUTION
Restoring memory during a print job cancels the
print job.
226 Appendix B Control panel menus ENWW