Changing control-panel settings, Job storage limit – HP LaserJet 4250 User Manual

Page 27

Advertising
background image

Changing printer-control-panel configuration settings

By using the printer control panel, you can make changes to general printer configuration
default settings such as tray size and type, sleep delay, printer personality (language), and
jam recovery.

The printer-control-panel settings can also be changed from a computer by using the setting
page of the embedded Web server. The computer shows the same information that the
control panel shows. For more information, see

Using the embedded Web server

.

CAUTION

Configuration settings seldom need to be changed. Hewlett-Packard Company recommends
that only the system administrator change configuration settings.

Changing control-panel settings

For a complete list of menu items and possible values, see

Control panel menus

. Certain

menu options appear only if the associated tray or accessory is installed. For example, the
EIO menu appears only if an EIO card is installed.

To change a control-panel setting

1. Press

M

ENU

to open the menus.

2. Use (

U

P

button) or (

D

OWN

button) to scroll to the menu that you want, and then press

(

S

ELECT

button).

3. Some menus might have several submenus. Use (

U

P

button) or (

D

OWN

button) to

scroll to the submenu item that you want, and then press (

S

ELECT

button).

4. Use (

U

P

button) or (

D

OWN

button) to scroll to the setting, and then press (

S

ELECT

button). Some settings change rapidly if (

U

P

button) or (

D

OWN

button) is held down.

An asterisk (*) appears next to the selection on the display, indicating that it is now the
default.

5. Press

M

ENU

to exit the menu.

NOTE

Printer-driver settings override control-panel settings. Software program settings override
both printer-driver settings and control-panel settings. If you cannot gain access to a menu
or item, it is either not an option for the printer or you have not turned on the associated
higher-level option. See your network administrator if a function has been locked (Access
denied menus locked
appears on the printer control-panel display).

Job storage limit

This option sets the limit for the maximum number of jobs that can be stored on the hard
drive at the printer. The maximum number allowed is 100, and the default value is 32.

NOTE

This option is only available if a hard drive is installed.

ENWW

Control panel

15

Advertising
This manual is related to the following products: