HP LaserJet 9000 Printer series - Manual (Page 114)

Chapter 5 Problem solving 114
Understanding printer messages
UNABLE TO
MOPY JOB A mopy job cannot be mopied because of a memory, disk, or configuration problem.
Only one copy will be produced.
If job name is unknown, insert UNTITLED.
UNABLE TO
STORE JOB A job cannot be stored on the printer because of a memory, disk, or configuration problem.
If job name is unknown, insert UNTITLED.
UNSUPPORTED SIZE
IN TRAY xx A sent job has a specified size that is not supported by the printer.
USE [TYPE]
[SIZE] FROM
TRAY N INSTEAD? If the requested paper size or type is not available, the printer asks if it should use a different
paper size or type.
Select a size or type from a different tray.
WAIT FOR PRINTER
TO REINITIALIZE The RAM disk setting has been changed before the printer is automatically rebooted. This
change will not take effect until the printer reinitializes.
If you change the mode of the external device, turn the printer off, turn the printer on, and wait
for the printer to reinitialize.
xx.y PRINTER ERROR
To continue
press A printer error which can be cleared by pressing in the printer control panel has occurred.
Message Explanation or recommended action