HP LaserJet 9000 Printer series User Manual
Page 183
Advertising
Appendix B
Control panel menus
183
Configure device menu
STAPLES=NONE
Values vary
depending on the
output device
attached
If stapling is requested, indicates where the staple is placed and how
many staples are placed.
If a stacker is attached to the printer, stapling is not an option.
If a stapler/stacker is attached, you can choose the following values:
NONE
ONE
(upper-left corner)
ANGLED
(upper-left corner)
TWO
THREE
SIX
CUSTOM
(only if the stapler/stacker has a definition for "custom")
Note
Because of paper size, paper orientation, and
paper feed direction, you should experiment with
staple options to find the results you want.
If a multifunction finisher is attached, you can choose the following
values:
NONE
ONE
TWO
SADDLE STITCH
Item
Values
Explanation
Advertising