HP LaserJet 9000 Printer series User Manual
Page 41
Chapter 2
Printing tasks
41
Selecting the output bin
If you choose the 3,000-sheet stacker or 3,000-sheet stapler/stacker, the output bins are Bin 1 (face up) and
Bin 2 (face down).
z
Bin 1 (face-up bin) is the top bin on the stacker or stapler/stacker. This bin holds up to 125 sheets of
paper in face-up order as they exit the printer. A sensor causes the product to stop when the bin is full.
Product operation continues when you empty or reduce the amount of paper in the bin.
z
Bin 2 (face-down bin) is the lower bin on the stacker or stapler/stacker. Bin 2 holds up to 3,000 sheets of
paper and allows you to stack or staple jobs. This bin is the default output bin.
If you choose the multifunction finisher, the output bins are the Stacker bin and the Booklet bin.
z
The Stacker bin (Bin 1) is the top bin on the multifunction finisher. The Stacker bin provides 1,000 sheets
of stacking capacity, and can offset each job as it is stacked, delivering unstapled jobs face up or face
down. This bin also provides stapling for up to 50 sheets of paper per document. The Stacker bin is the
default output bin when the multifunction finisher is attached.
z
The Booklet bin (Bin 2) is the lower bin on the multifunction finisher. This bin provides folding and saddle
stitching of booklets for up to 10 sheets of paper.
Bin 2
(face down)
Bin 1
(face up)
Stacker bin
(Bin 1)
Booklet bin
(Bin 2)
Multifunction finisher
3,000-sheet stacker or
3,000-sheet
stapler/stacker