Selecting an output location – HP LaserJet 9000 Printer series User Manual
Page 42
Chapter 2
Printing tasks
42
Selecting the output bin
Selecting an output location
You can select an output location (bin) through your program or printer driver. (Where and how you make
selections depends on your program or printer driver.) If you cannot select an output location from the
program or printer driver, set the default printer output location from the printer control panel.
To select an output location from the control panel
1
Use
or
to scroll to
Configure Device
and press
.
2
Use
or
to
scroll
to
Printing
and press
.
3
Use
or
to
scroll
to
Paper Destination
and press
.
4
Use
or
to scroll to the output bin or device you want and press
. Your network administrator may
have changed the name of the device. An asterisk (
*
) appears next to your selection.