Printing labels, Printing transparencies, Printing labels printing transparencies – HP LaserJet 9000 Printer series User Manual
Page 48
Chapter 2
Printing tasks
48
Printing special paper
Printing labels
z
Orient labels according to the guidelines in
.
z
Print a stack of up to 50 sheets of labels from optional Tray 1.
z
Use only labels recommended for laser printers. Make sure the labels meet the correct specifications.
(See the introduce guide on the product CD, or go to
.)
CAUTION
Failure to follow these instructions may damage the printer.
Special cautions:
z
Do not load optional Tray 1 to capacity, because labels are heavier than paper.
z
Do not use labels that are separating from the backing sheet, wrinkled, or damaged in any way.
z
Do not use labels that have the backing sheet exposed. (Labels must cover the entire backing sheet with
no exposed spaces.)
z
Do not feed a sheet of labels through the printer more than once. The adhesive backing is designed for
only one pass through the printer.
z
Do not print on both sides of labels.
Printing transparencies
z
Transparencies used in this printer must be able to withstand the 200° C (392° F), the maximum
temperature for the printer.
z
Use only transparencies recommended for use in laser printers.
z
Use the standard output bin for transparencies.
CAUTION
Do not attempt to print on both sides of transparencies. Do not attempt to print envelopes, custom
paper, or paper heavier than 199 g/m
2
(53 lb). Damage to the printer or jams might result.