HP XP P9500 Storage - Manual (Page 17)

For more information about enabling the copy threshold option, contact HP Technical Support.
Interoperability with other software applications
You can create FS pairs using pair volumes for replication software applications such as BC/SS
and Continuous Access Synchronous (Cnt Ac-S). You can also create FS pairs using volumes to
which attributes are defined by Data Retention (Data Ret) or RAID Manager.
The following table shows whether you can share pair volumes by FS and other software
applications.
Used as FS S-VOL Used as FS P-VOL Software volume types
No No SS P-VOL
No No SS S-VOL
No Yes
3
BC/SS P-VOL
No Yes BC/SS S-VOL
No No BC/SS reserve volume
No Yes Cnt Ac-S P-VOL
No Yes Cnt Ac-S S-VOL
No Yes Continuous Access Journal (Cnt Ac-J) P-VOL
No Yes Cnt Ac-J S-VOL
No No Cnt Ac-J journal volume
No No Auto LUN source volume
No No Auto LUN target volume
No No Auto LUN reserve volume
No No External Storage Access Manager P-VOL
No No External Storage Access Manager S-VOL
No No External Storage Access Manager quorum disk
No No Online Data Migration volume
Yes Yes Read Only volume
1, 4, 6
Yes Yes Protect volume
1, 4, 6
No Yes "S-VOL Disable" volume
4, 6
Yes Yes Zero Read Capacity volume
2, 5
Yes Yes Invisible volume
2, 5
No No VMA volume
Yes Yes Reserve volume
No Yes THP V-VOL
1. If you use RWC to share the volume with other software applications, the pair status determines whether you can
share the volume.
2. You can use the RAID Manager to share the volume with other software applications; you cannot use RWC to do
this.
3. You cannot Quick Restore.
4. Data Ret is required to set Read Only, Protect, and S-VOL Disable attributes.
Interoperability with other software applications 17