HP XP P9500 Storage - Manual (Page 19)

FS pool task Access attribute of volume specified by FS
Pool-VOL setting
No S-VOL Disable
Legend
Yes: You can perform the task
No: You cannot perform the task
NOTE: FS tasks do not change access attributes of volumes. Reverse resync tasks do not copy
access attributes of S-VOLs to P-VOLs when writing snapshot data to P-VOLs,
As shown in the following table, Data Ret. cannot assign access attributes to some FS P-VOL and
S-VOLs, depending on the FS pair status.
Access attribute to be assigned FS volume
Read Only
Protect
S-VOL Disable
Read/Write Volume Pair status
Yes Yes P-VOL COPY
No Yes S-VOL
Yes Yes P-VOL PAIR, PFUL
Yes Yes S-VOL
Yes Yes P-VOL PSUS, PFUS
Yes Yes S-VOL
Yes Yes P-VOL SMPL(PD)
No Yes S-VOL
No Yes P-VOL RCPY
No Yes S-VOL
Yes Yes P-VOL PSUE
No Yes S-VOL
Legend
Yes: You can perform the setting
No: You cannot perform the setting
Auto LUN
To perform FS tasks on volumes, the volume must not be in a migration plan, regardless of the
migration plan status. You can use FS pair volumes or pool volumes, but not for Auto LUN V2
migration plans.
For more information about the migration plan status and Auto LUN V2 tasks, see the HP XP P900
Auto LUN User Guide.
Business Copy
You can share FS P-VOLs with BC/SS P-VOL and S-VOLs.
Interoperability with other software applications 19