HP XP P9500 Storage - Manual (Page 95)

Select Primary Volumes window
Description Item
Specifies whether you will use the P-VOL of snapshot pair. Use Primary Volumes of Snapshot
Pairs
Values:
•
Yes: The storage system shows only P-VOLs of the pair that is already created
in the Available LDEVs table.
• No: The storage system shows only the LDEV of the pair that is not created
yet in the Available LDEVs table.
For BC/SS or BC Z, this item is blank.
Port name of the LDEV's LUN path. Port ID
Nothing is shown for BC Z.
Host group name of the LDEV's LUN path. Host Group Name
Any is shown by default.
(For BC Z) This item is blank.
Selected pool name and identifier. Click to open the Select Pool window. Select Pool button
If Yes is selected for Use P-VOLs of Snapshot Pairs, this button is unavailable.
(For BC/SS or BC Z) This item is blank.
Click to add the selected LDEVs from the Available LDEVs table to the Selected
LDEVs table. Add button
Click to move the selected LDEVs from the Selected LDEVs table back to the
Available LDEVs table. Remove button
Available LDEVs table
Description Item
The identifier of the LDEV which can be specified as the P-VOL. LDEV ID
The LDEV's name. LDEV Name
The port name of the LDEV's LUN path. Port ID
(For BC Z) This item is blank.
Create Pair wizard 95