Extend the server from the rack – HP ProLiant ML370 G5 Server User Manual
Page 22
Advertising
Operations 22
For operations involving removable media bay access, the media bay panel may be removed.
Extend the server from the rack
IMPORTANT:
If the server is installed in a telco rack, remove the server from the rack to access
internal components.
NOTE:
If the server is in a rack and in the shipping configuration, remove the two shipping
screws directly behind the levers.
1.
Release the two levers on the lower outside corners of the server.
2.
Extend the server on the rack rails until the server rail-release latches engage.
NOTE:
The release latches will lock into place when the rails are fully extended.
Advertising