HP ProLiant ML370 G5 Server - Manual (Page 23)

Operations 23
WARNING: To reduce the risk of personal injury or equipment damage, be sure that the rack
is adequately stabilized before extending a component from the rack.
WARNING: To reduce the risk of personal injury, be careful when pressing the server rail-
release latches and sliding the server into the rack. The sliding rails could pinch your fingers.
3. After performing the installation or maintenance procedure, press the server rail-release latches and
slide the server into the rack.
Remove the rack bezel
The rack bezel must remain installed during normal server operations. The rack bezel remains installed for
all hardware options installations, except for removing or replacing a SAS hard drive cage.
1. Power down the server (on page 20 ).
2. Extend or remove the server from the rack (" Extend the server from the rack " on page 22 ).
3. Remove the access panel (on page 25 ).
4. Remove the media drive blanks or installed media drives (" Installing a half-height or full-height media
device " on page 56 ).