Sas cabling – HP ProLiant ML370 G5 Server User Manual
Page 76
Advertising
Cabling 76
Item Description
10
SAS drive connector (9-12)
SAS cabling
NOTE:
The center wall is removed for illustration purposes only.
•
SAS data cabling
IMPORTANT:
When installing a x3/x1 SAS cable, HP recommends that the x3 part of the
x3/x1 cable be linked to the SAS hard drive backplane connector that corresponds to hard
drive slots 1 to 4. In this setup, hard drive slot 1 will not be available, but since hard drive slots
2 to 4 will be connected, one continuous volume can be created.
Advertising