Installing fbdimms – HP ProLiant ML370 G5 Server User Manual
Page 49
Advertising
Hardware options installation 49
3.
Remove the access panel (on page
4.
Remove the processor air baffle (on page
5.
Remove a memory board ("
Removing and installing a memory board
6.
Remove the FBDIMM.
To replace the component, reverse the removal procedure.
Installing FBDIMMs
1.
Power down the server (on page
2.
Do one of the following:
o
Open or remove the tower bezel, as needed ("
Open or remove the tower bezel
o
Extend the server from the rack (on page
3.
Remove the access panel (on page
4.
Remove the processor air baffle (on page
5.
Remove a memory board ("
Removing and installing a memory board
6.
Open the FBDIMM slot latches.
Advertising