HP ProLiant ML370 G5 Server - Manual (Page 47)

Hardware options installation 47
WARNING: To prevent personal injury from hazardous energy:
• Remove watches, rings, or other metal objects.
• Use tools with insulated handles.
• Do not place tools or metal parts on top of batteries.
Removing and installing a memory board
1. Power down the server (on page 20 ).
2. Do one of the following:
o Open or remove the tower bezel, as needed (" Open or remove the tower bezel " on page 21 ).
o Extend the server from the rack (on page 22 ).
3. Remove the access panel (on page 25 ).
4. Remove the processor air baffle (on page 26 ).
5. Remove the memory board and place it on a flat surface.
6. Do one of the following:
o Remove a FBDIMM.
o Install a FBDIMM (" Installing FBDIMMs " on page 49 ).
7. Align the memory board with the memory slot and the memory board guide clips.