HP ProLiant ML370 G5 Server - Manual (Page 61)

Hardware options installation 61
3. Install the second hot-plug power supply.
4. Connect the power cord to the redundant power supply.
5. Use the power cord management clip to secure the cord and form a service loop.
6. Connect the power cord to the power source.
7. Be sure that the power supply LED is green (" Rear panel LEDs " on page 12 ).
8. Be sure that the front panel external health LED is green (" Front panel LEDs and buttons " on page 8 ).
IMPORTANT: For maximum server availability, be sure that the two power supplies are
powered by separate AC power sources.
Expansion board options
The server supports PCI-X and PCI Express expansion boards.