HP ProLiant ML370 G5 Server User Manual
Page 72
Advertising
Hardware options installation 72
14.
Connect the IDE CD-ROM drive cable and power cable.
15.
Push the CD-ROM drive all the way into the bay until the locking latch clicks into place, securing the
drive.
16.
Install the media blanks horizontally in the bay below the CD-ROM drive.
NOTE:
Install any optional tape drives ("
Installing a half-height or full-height media device
page
) instead of the media blanks at this time.
17.
Remove the video connector blank from the media bay spacer.
Advertising