HP ProLiant ML370 G5 Server - Manual (Page 60)

Hardware options installation 60
4. Install the access panel (on page 26 ).
5. Do one of the following:
o Close or install the tower bezel, as needed.
o Slide the server back into the rack.
Redundant hot-plug power supply option
The server supports a second hot-plug power supply to provide redundant power to the system in the
event of a failure in the primary power supply.
CAUTION: If only one power supply is installed, do not remove the power supply unless the
server has been powered down. Removing the only operational power supply will cause an
immediate power loss.
To install the component:
1. Access the rear panel.
2. Remove the power supply blank.