HP StorageWorks XP Remote Web Console Software - Manual (Page 152)

NOTE:
When the Preview list displays changes that have been made, you can only perform the same
type of operation that you have been doing and cannot perform most of other operations (you
can only view detailed information about pairs even when the Preview list displays changes).
For example, if you are trying to release pairs and the Preview list is displaying the pairs that
you want to release, you are unable to perform any other operations; for example, you are
unable to split pairs and restore pairs.
• Operation: Indicates the operation that will occur when you select Apply.
Add Pair Create pairs
Suspend Pair Split pairs
Resume Pair Restore pairs
Delete Pair Release pairs
Change Pair Option Change pair option(s)
Blank Nothing will occur when you click Apply
• Preview: The number to the left of the slash (/) indicates the number of items displayed in
the Preview list.
The number to the right of the slash indicates the maximum number of items that can be displayed
in the Preview list.
For example, if Preview 010/1096 is displayed, you can add another 4,086 items to the Preview
list.
• Apply: Applies settings in the Preview list to the storage systems.
• Cancel: Cancels settings in the Preview list.
Information on the Pair Operation window will be updated when you do one of the following:
1. Select another tab and then reselect the Pair Operation tab.
2. Click File, Refresh on the menu bar of the XP Remote Web Console main window.
3. Select the Apply button.
4. Select modify mode when you are in view mode.
5. Update the Display Filter window.
6. Click the Previous button or the Next button.
Filtering Information in the List in the Pair Operation Window
The Display Filter window ( Figure 63 on page 153) enables you to filter information in the list in the Pair
Operation window. The list will display only the volumes that satisfy certain conditions.
To filter information in the list in the Pair Operation window:
1. In the Pair Operation window ( Figure 61 on page 148), select Display Filter.
2. Use the Display Filter window to specify information that you want to display in the list.
3. Select Set to close the Display Filter window.
The list in the Pair Operation window displays the specified information only.
Notes :
• To restore the list to the default status (i.e., the status before filtering), select Reset in the Display
Filter window and then Set in the same window.
• If you change settings in the Display Filter window, the changes will remain effective during
the URz session until you reset the settings.
152 Performing URz Pair Operations