Planning of journal volumes, Why planning is necessary, What to consider for planning – HP StorageWorks XP Remote Web Console Software User Manual

Page 67: How to do planning, Data transfer speeds for journal volumes

Advertising
background image

Planning of Journal Volumes

Why Planning is Necessary

Data transfer speed for journal groups is affected by specifications of journal volumes that the journal

groups use. Therefore, you need to think about specifications of journal volumes to be used by journal

volumes, in order to achieve the data transfer speed that you want.

What to Consider for Planning

This section explains what you need to consider when deciding on journal volume specifications.
The following factors affect the speed for writing to and reading from journal volumes, particularly

when a temporary communication path failure occurs between the primary storage system and the

secondary storage system, or when the amount of data transferred from hosts to the primary storage

system is increasing:

RAID configuration of the RAID groups that will contain journal volumes

Types of physical volumes in the RAID groups that will contain journal volumes

Frequency of access to non-journal volumes in the RAID groups that will contain journal volumes

Data transfer speed required for the non-journal volumes mentioned above

Disk usage rate for RAID groups

The following factor affects the time during which data transfer with hosts can continue without being

influenced by a temporary communication path failure between the primary storage system and the

secondary storage system, or without being influenced by an increase in the data to be transferred from

hosts to the primary storage system.

Capacity of journal volumes

How to do Planning

Data Transfer Speeds for Journal Volumes

Figure 13

on page 68 illustrates how the data transfer speed (i.e., the amount of data to be transferred

per unit of time) will change as time elapses, citing different types of data transfer speed with URz.

Data transfer speed between hosts and the primary storage system goes through two phases; in one

phase the data transfer speed remains almost unchanged, and in another phase the data transfer

speed increases temporarily.

Hitachi Universal Replicator for z/OS user guide for XP12000/XP10000 Disk Arrays and SVS 200

67

Advertising
This manual is related to the following products: