HP StorageWorks XP Remote Web Console Software - Manual (Page 166)

11. In the list of the Pair Operations window, verify that the pair(s) has been restored successfully.
If the pair has been restored successfully, the status of the pair is Pending or Duplex.
• If the pair has been restored successfully, the status of the pair is Pending or Duplex.
• If delta resync operation has been performed successfully, the status of the pair is Pending
or Duplex.
• If the operation to change pair status has been performed successfully, the status of the
pair changes to Hold.
12. To monitor the progress of restoring pair(s), click File, Refresh on the menu bar of the XP Remote
Web Console main window to update the information in the list, or use the Detailed Information
window to monitor the detailed status of each pair.
Figure 69 Resume Pair Window
The Resume Pair window displays the following:
• Range: Allows you to specify the restore range. The default is Volume if two or more pairs in the
same mirror are selected. The default is Group if not. The default setting is Group when the pair
status is Hold or Hlde, and in that case you cannot change the default setting.
• Volume: Only the specified pair(s) will be restored.
• Group: All pairs in the same mirror(s) as the selected pair(s) will be restored.
If the following two conditions are satisfied and you select Apply, a warning message will be
displayed and processing cannot be continued:
• The
Preview list contains two or more pairs belonging to the same mirror.
• The Range column displays Group for at least one of the above pairs.
To be able to continue processing, do either of the following:
• Ensure that the Range column displays Volume for all pairs in the same mirror.
• In
the Preview list, select all but one pair in the same mirror, right click the selected pairs,
and then select Delete.
• Priority: Allows you to specify the desired priority (1-256) (scheduling order) for the pair-restoring
operations.
If Range is Group, you cannot change the Priority option.
• DKC: Indicates the followings about a remote storage system.
• The serial number with the LDKC number.
• The controller ID with the model name.
• The path type.
• Resync Mode: Indicates the processing after recovery of the pairs.
• Normal: Split pair whose status is Suspend will be recovered.
• Delta: Delta resync operation will be performed. For information
about the requirements to perform delta resync operation, see
“ Requirements for Performing Delta Resync Operation ” on page 96.
• Return to standby: The status of pairs will be recovered from Hlde to Hold.
166 Performing URz Pair Operations