HP StorageWorks XP Remote Web Console Software - Manual (Page 157)

Figure 65 Add Pair Window
The Add Pair window displays the following:
• P-VOL: Indicates a primary data volume. The numbers are the LDKC number, the CU number and
the LDEV number of the primary data volume.
Notes :
• P-VOL displays only one primary data volume even when two or more primary data volumes
are selected in the Pair Operation window. P-VOL only displays the primary data volume that
has the smallest volume number.
• If a volume is an external volume, the symbol "#" appears after the LDEV number. For
detailed information about external volumes, please refer to the XP External Storage Software
user’s guide.
• S-VOL: Allows you to select a secondary data volume. When specifying a secondary data
volume, you must use the two drop-down lists to select the CU image number and the LDEV
number of the secondary data volume.
NOTE:
You can select only one secondary data volume even when two or more primary data volumes
are selected in the Pair Operation window. URz automatically specifies the other secondary data
volumes. For detailed information, refer to the explanation about the Select Other S-VOL(s) option
later in this section.
NOTE:
If you selected more than one primary data volume, select the secondary data volume for the primary
data volume being displayed. The secondary data volumes for the rest of the primary data volumes
are automatically assigned according to the volume number. For example, if you select three primary
data volumes and select 01 as the S-VOL for the first primary data volume, the secondary data
volumes for the two other primary data volumes will be 02 and 03 .
Hitachi Universal Replicator for z/OS user guide for XP12000/XP10000 Disk Arrays and SVS 200 157