HP StorageWorks XP Remote Web Console Software - Manual (Page 176)

Figure 73 History Operation Window
The History window presents:
• Status displays the current status of operation history:
• No history file exists: Operation history does not exist.
• Reading a history file failed: An attempt to read operation history failed.
• Updating ... n (%): Updating of operation history is now in progress. "n (%)" indicates the
progress (in %) of the updating process of operation history.
• Complete: Updating of operation history has been completed.
When the updating process is in progress, the checking process automatically continues until the
updating process finishes. The updating process is checked at ten-second intervals.
• Last Update: Displays the date and time when operation history was last updated.
• Export: Saves operation history in a CSV file. For detailed information, see
“ Saving Operation History into a Text File ” on page 179.
NOTE:
You cannot save the history file while operation history is being updated. Please save operation
history in a text file after operation history is updated.
• The list displays history of operations on data volume pairs in the connected storage system.
The list consists of the following columns:
• Operation Date/Time: The date and time when the operation was completed.
• Operation: The operations are:
Pair definition: A data volume pair was defined.
Add Pair Start: Creation of the data volume pair was started.
Add Pair Complete: Creation of the data volume pair was finished.
Resume Pair Start: Restoring of the data volume pair was started.
Resume Pair Complete: Restoring of the data volume pair was finished.
176 Viewing History of Data Volume Pair Operations