HP LaserJet 4050 Printer series - Manual (Page 130)

108 Chapter 4: Problem Solving
EN
UNSUPPORTED SIZE
IN TRAY [YY] An external paper handling device detected an unsupported paper
size. The printer will go offline until the condition is corrected.
USE [TYPE]
[SIZE] INSTEAD? If the requested paper size or type is not available, the printer asks if
it should use another paper size or type instead.
Press [- Value +] to scroll through the available types and sizes. Press
[Select] to accept the alternate type or size.
WAIT FOR PRINTER
TO REINITIALIZE The RAM disk setting has been changed from the printer’s control
panel. This change will not take effect until the printer reinitializes.
If you change the mode of the external device, turn the printer off,
turn the printer on and wait for the printer to reinitialize.
WRONG ENVELOPE
FEEDER INSTALLED The envelope feeder you are trying to install will not work for this
printer.
To order an envelope feeder for the printer, see page 8.
Make sure the envelope feeder is installed correctly (page 50).
XX.YY
PRINTER ERROR
PRESS GO TO
CONTINUE A printer error has occurred that can be cleared by pressing [Go] in
the printer’s control panel.
13.x PAPER JAM
[LOCATION] Remove jammed paper from the specified location (page 90).
Open and close the top cover to clear the message.
Open the top cover.
Remove toner cartridge and clear all paper from underneath the toner
cartridge area.
Caution
Ensure all jammed paper is removed before opening and closing the
top cover.
Open and close the top cover to clear the message.
If the message persists after all jams have been cleared, a sensor
might be stuck or broken. Contact an HP-authorized service or
support provider. (See the HP Customer Care Service and Support
pages at the front of this user’s guide.)
20 INSUFFICIENT
MEMORY
alternates with
PRESS GO TO
CONTINUE
The printer received more data than can fit in its available memory.
You might have tried to transfer too many macros, soft fonts, or
complex graphics.
Press [Go] to print the transferred data (some data might be lost),
then simplify the print job or install additional memory (page C-1).
Printer Messages (Continued)
Message Explanation or Recommended Action