HP LaserJet 4050 Printer series - Manual (Page 83)

EN
Chapter 2: Printing Tasks 61
Different First Page
Follow these instructions for printing a first page that is different from
other pages in the print job.
1 For Windows, select “Use different paper for first page” in your
printer driver. Choose Tray 1 (or Manual Feed) for the first page
and one of the other trays for the remaining pages. Place the
paper for the first page in Tray 1. (For manual feed, place paper
in Tray 1 after the job is sent to the printer and the printer
requests paper.) Place the paper with the side-to-be-printed up,
the top of the page facing the rear of the printer, and the long
edge leading into the printer.
For Macintosh computers, select “First from” and “Remaining
from” in the print dialog box.
Note Where and how you make selections depends on your software
application or associated printer driver. (Some options may only be
available through the printer driver.)
2 Load the paper for the remaining pages of the document into
another tray. You may select the first and remaining pages by
type of paper. For more information, see “Printing by Type and
Size of Paper” on page 65