HP LaserJet 4050 Printer series - Manual (Page 79)

EN
Chapter 2: Printing Tasks 57
Guidelines for Printing Custom-Size Paper
•
Do not attempt to print on paper smaller than 3 inches (76 mm)
wide or 5 inches (127 mm) long.
•
Set page margins at least .17 inch (4.23 mm) away from the
edges.
•
Feed short-edge first.
Setting Custom Paper Sizes
When custom paper is loaded, size settings need to be selected
from the software application (the preferred method), the printer
driver, or from the printer’s control panel.
Note Settings in the printer driver and software application override
control panel settings. (Software application settings override
printer driver settings.)
Figure 16 Printing Custom-Size Paper
X (front edge)
Y (side edge)
Feed short-edge
first