HP LaserJet 4050 Printer series - Manual (Page 44)

22 Chapter 1: Printer Basics
EN
Software for Windows
Use the Typical Install or Custom Install option (if you are a
network administrator) to install the HP software. (This includes
several printer drivers. For more information, see page 20.)
Network Administrators: If the printer is attached to a network
through an HP JetDirect EIO card, before you can print, the printer
must be configured for that network. To configure the printer for your
network, you can select Custom Install from the printer installation
program or use HP JetAdmin software. (See the
HP JetDirect Print
Server Software Installation Guide or the getting started guide that
came with your printer.)
Note You should use the Custom Install option because it allows you to
install administration software such as HP JetAdmin and
HP Resource Manager.
Use the Disk Images option to create a set of disks with the exact
software you want the end users to use. This allows you to distribute
drivers without distributing administration software to end users.