HP LaserJet 4050 Printer series - Manual (Page 216)

B-16 Control Panel Menus
EN
PAGE PROTECT=
AUTO AUTO
ON This item appears only after a 21 PAGE TOO
COMPLEX, PRESS GO TO CONTINUE message
displays (page 108).
Memory Enhancement technology (MEt)
attempts to guarantee that all pages will print.
If the page does not print, turn
PAGE PROTECT
to ON . This might increase chances of a 20
INSUFFICIENT MEMORY, PRESS GO TO
CONTINUE
message. If this occurs, simplify the
print job or install additional memory
(page C-1).
CLEARABLE
WARNINGS=JOB JOB
ON Set the amount of time that a clearable warning
is displayed on the printer’s control panel.
JOB : Warning messages display on the control
panel until the end of the job from which they
were generated.
ON : Warning messages display on the control
panel until [Go] is pressed.
SMALL PAPER
SPEED=NORMAL NORMAL
SLOW Select SLOW when alternately printing
envelopes or small paper and standard paper
sizes.
Be sure to return the speed to NORMAL when
finished.
AUTO CONTINUE=
ON ON
OFF Determine how the printer reacts to errors.
ON : If an error occurs that prevents printing, the
message will display, and the printer will go
offline for 10 seconds before returning online.
OFF : If an error occurs that prevents printing,
the message will remain on the display and the
printer will remain offline until
[Go] is pressed.
If the printer is on a network, you will probably
want to turn
AUTO CONTINUE to ON .
TONER LOW=CONTINUE CONTINUE
STOP Determine how the printer behaves when toner
is low. The
TONER LOW message will first
appear when the toner cartridge is almost out
of toner. (About 100 to 300 sheets can still be
printed.)
CONTINUE : The printer will continue to print
while the TONER LOW message is displayed.
STOP : The printer will go offline and wait for
further action.
For more information, see page 78.
Configuration Menu (Continued)
Item Values Explanation