HP LaserJet 4050 Printer series - Manual (Page 89)

EN
Chapter 2: Printing Tasks 67
Job Retention Features
To use the job retention features listed below, you must install a hard
disk in the printer and properly configure the drivers.
Caution Make sure to identify your jobs in the printer driver before printing.
Using default names may override previous jobs with the same
default name or cause the job to be deleted.
Quick Copying a Job
The quick copy feature prints the requested number of copies of a
job and stores a copy on the printer’s hard disk. Additional copies
of the job can be printed later. This feature can be turned off from
the driver.
For more information about specifying the number of quick copy
jobs that can be stored, see the
QUICK COPY JOBS control panel
item described on page B-18.
Printing Additional Copies of a Quick Copy
Job
To print additional copies of a job stored on the printer’s hard disk
from the control panel:
1 Press [Menu] repeatedly until QUICK COPY JOBS MENU appears.
2 Press [Item] until the desired user or job name appears.
Note If you are using a Macintosh computer, the user name appears on
the first line of the display and the job name appears on the second
line of the display. After you have selected the desired user name
using
[Item] , press [Value] until the desired job name appears.
3 Press [Select] to select the job. COPIES=1 appears.
4 Press [- Value +] until the desired number of copies appears.
5 Press [Select] to print the job.