HP LaserJet 4050 Printer series - Manual (Page 59)

EN
Chapter 2: Printing Tasks 37
Loading Trays 2 and 3 (4050 T/4050 TN)
Trays 2 and 3 are 250-sheet trays. For
supported sizes of paper, see
page A-3. Choose A5 and B5 ISO as
custom sizes in the printer driver for
these trays (page 56).
Note
To avoid paper jams, do not load trays
while the printer is printing.
1 Pull the tray completely out of the
printer.
2 If the tray is not already set to the
desired paper size, snap the left and
right guides into place to match the
width of the paper.
3 Locate the release tabs (indicated by
the two arrows).
Squeeze the blue tabs to release
them from the slots while sliding the
back section of the tray to the desired
paper size. Make sure the tabs lock
into the correct slots.
Continued on the next page.