HP LaserJet 4050 Printer series - Manual (Page 205)

EN
Control Panel Menus B-5
Paper Handling Menu
When paper handling settings are correctly configured through the
control panel, you can print by choosing the type and size of paper
from the printer driver or software application. For more information,
see page 65.
Some items in this menu (such as duplex and manual feed) can be
accessed from a software application, or from the printer driver (if
the appropriate driver is installed). Printer driver and software
application settings override control panel settings. For more
information, see page 59.
Paper Handling Menu
Item Values Explanation
ENVELOPE FEEDER
SIZE=COM10 For supported
paper sizes, see
page A-3. This item appears only when the optional
envelope feeder is installed. Set the value to
correspond with the envelope size currently
loaded in the envelope feeder.
ENVELOPE FEEDER
TYPE=PLAIN For supported
paper types, see
page 66. This item appears only when the optional
envelope feeder is installed. Set the value to
correspond with the envelope type currently
loaded in the envelope feeder.
TRAY 1 MODE=
FIRST FIRST
CASSETTE Determine how the printer will use Tray 1.
FIRST : If paper is loaded in Tray 1, the printer
will pull paper from that tray first.
CASSETTE : A paper size must be assigned to
Tray 1 using the TRAY 1 SIZE option (the next
item in this menu when TRAY 1 MODE=
CASSETTE ). This allows Tray 1 to be used as a
reserved tray.
For more information, see page 63.
TRAY 1 SIZE=
LETTER For supported
paper sizes, see
page A-3. This item appears only when TRAY 1 MODE=
CASSETTE . Set the value to correspond with
the paper size currently loaded in Tray 1.
TRAY 1 TYPE=
PLAIN For supported
paper types, see
page 66. This item appears only when TRAY 1 MODE=
CASSETTE . Set the value to correspond with
the paper type currently loaded in Tray 1.
TRAY 2 TYPE=
PLAIN For supported
paper types, see
page 66. Set the value to correspond with the paper type
currently loaded in Tray 2.