HP LaserJet 4050 Printer series - Manual (Page 206)

B-6 Control Panel Menus
EN
TRAY 3 TYPE=
PLAIN For supported
paper types, see
page 66. Set the value to correspond with the paper type
currently loaded in Tray 3.
.
TRAY 4 TYPE=
PLAIN For supported
paper types, see
page 66. This item appears only when a fourth paper tray
is installed (available only on the HP LaserJet
4050 T/4050 TN printers). Set the value to
correspond with the paper type currently
loaded in Tray 4.
MANUAL FEED=OFF OFF
ON Feed the paper manually from Tray 1, rather
than automatically from a tray. When
MANUAL FEED=ON and Tray 1 is empty, the
printer goes offline when it receives a print job
and displays
MANUALLY FEED [PAPER SIZE] .
For more information, see page 64.
DUPLEX=OFF OFF
ON This item appears only when an optional
duplexer is installed. Set the value to
ON to print
on both sides (duplex) or OFF to print on one
side (simplex) of a sheet of paper.
For more information, see page 41.
BINDING=
LONG EDGE LONG EDGE
SHORT EDGE This item appears only when an optional
duplexer is installed and the duplex option is
on. Choose the binding edge when duplexing
(printing on both sides of paper).
For more information, see page 41.
OVERRIDE
A4/LETTER=NO NO
YES Choose YES to print on letter size paper when
an A4 job is sent, but no A4 size paper is loaded
in the printer (or to print on A4 size paper when
a letter job is sent, but no letter paper is loaded
in the printer).
CONFIGURE FUSER
MODE MENU=NO NO
YES Configure the fuser mode associated with each
paper type. (This is only necessary if you are
experiencing problems printing on certain
paper types.)
NO : The fuser mode menu items are not
accessible.
YES : Additional items appear (see below).
Note
To see the default fuser mode for each paper
type, select
YES , scroll back to the Information
Menu, and print a menu map (page B-4).
Paper Handling Menu (Continued)
Item Values Explanation