HP LaserJet 4050 Printer series - Manual (Page 144)

122 Chapter 4: Problem Solving
EN
Does the job print as expected? (continued)
YES
Go to step
5
.
The print
job is not
formatted
correctly.
Pages are
not fed
correctly or are
damaged.
There are
print quality
problems.
Check that you are using the proper
printer driver (page 24).
Check the software settings. (See the
software help.)
Try a different font.
Downloaded resources might have
been lost. You might need to
download them again.
Make sure paper is loaded correctly
and that the guides are not too tight
or too loose against the paper stack.
(See the sections on loading paper,
starting on page 34.)
If you are trying to print A4 paper, the
side guides in the tray might have
slipped out of place. (Make sure the
side guides are locked into position.)
If you are having problems printing
custom-size paper, see page 57.
If pages are wrinkled or curled, or if
the image is skewed on the page, see
page 116.
Adjust the print
resolution
(page B-8).
Check that REt is
on (page B-8).
Go to page 116.
NO